IELTS Hunters🥷🥷🥷

Ustoz

Ha

Writing yozyapmiz

The diagram illustrates the number of stages that required to produce aluminium cans. Overall, the production of aluminium cans is a totally man-made and lengthy process, including 11 different phases lasting for six weeks, which starts with collecting waste products by garbage trucks and finishes with manufacturing ready-to-use cans. The process begins when the waste products are gathered by a garbage truck, which is followed by depositing them in the factory. Once placed, they are washed with clean water and subsequently crushed into large blocks in hydraulic press. During the next stage, the large blocks are processed to prepare for the further chemical treatment to erase and remove unwanted particles and impurities. After the aluminium cans are melted into liquid form by heating at high temperature, the liquid is then poured into special mould to make raw material. Upon completion, the aluminium cans are weighted to maintain their balance and weight. Once they have been rolled, the final aluminium cans are produced and ready to use.

The diagram illustrates the process of cleaning water.Overall, the process consists of 10 different stages. It starts with intake screens and finishes with water being delivered to faucets. The first stage begins with water passing through intake screens and being sent to a pipe. After that, the water is flash mixed with polyaluminium chloride and oxidants. Next, the water is collected in the flocculation tank before being transferred to the settling basin, where heavier particles settle at the bottom. The clarified water is then mixed with chlorine. Following this, the chlorinated water passes through a membrane filter to remove the remaining impurities. It is then disinfected by adding chlorine, lime, and fluoride to ensure that it is safe for drinking. Finally, the treated water is delivered to household faucets through the distribution system.

The diagram shows how water is treated before it is supplied to people. Overall, the process has ten stages. It begins with collecting raw water and ends with supplying clean water to homes. Different chemicals and treatment methods are used to make the water safe. First, raw water passes through intake screens, which remove large waste materials. Then, pumps send the water to a mixing tank. At this stage, chemicals are added to the water. After that, the water moves to a flocculation , where small particles come together. Next, the water enters a settling basin. In this stage, heavy particles sink to the bottom and are removed. Then chlorine is added, and the water passes through a filter membrane to remove other impurities. Finally, more chemicals are added to disinfect the water. The treated water is then pumped to consumers and flows from household taps.

The diagram illustrates the number of stages that required to produce fresh water. Overall, the process of freshwater is a completely mechanical and lengthy process consisting of ten stages, which starts with water passing into intake screens and finishes with clean water to take from faucet. The process begins when the water passed from intake screens, which is followed by pumping the water into pipe. Once placed, it is flash mixed with chemical elements, such as polyaluminium chloride and oxidants to pass flocculation stage and subsequently moved to settling basin to clean the water from filings. During the next stage, the water passed through chlorine blocks to make more clean and then it proceeded to pass from inside the filter membrane, after which it is disinfected with chlorine, lime or ( sodium hydroxide), fluoride to ensure that it is safe for drinking. Once the treated water pumped to household faucets through the distribution system.

The diagram illustrates the process of the water cleaning. Overall, processing the water is totally man-made and lengthy process, including 10 different stages, which starts with intaking the raw water from screens to remove some west and finishes with producing clean water to local people. The process begins when the dirty water intakes through the screens to remove unnecessary rubbish like leaves, plastics or rocks. Once they begin the process, the water passes through pumps to starts cleaning pressure. Next, the water flashes mix with polyaluminium chloride and oxidants. Then the mixture transports to flocculation prosses, the trashes into the water combines together. Following this the water settling into a basin then their west separates from the water. In the subsequent step is treating the water with chlorine and filter them with membrane to remove small bacteria. Afterwards it disinfections with chlorine, lime or sodium hydroxide and fluorides. At the end they deliver through pumped for public use.

The picture illustrates the process of producing fresh water. Overall, it is a man-made and natural process, and it takes 10 stages and a short time. This process begins with collecting water in the reservoir and ends with the distribution of treated water to consumers. Firstly, water is collected naturally, such as rainfall and snowmelt, and sent to pumps via intake screens. Water is mixed with chemicals, where elements such as polyaluminium chloride and oxidants are added to remove impurities. Once flocculated, water is transported to the large settling basin. The next stage begins with the addition of chlorine to the water, and it is cleared in the filter membrane. When water has arrived at the disinfection stage, it is mixed with several elements. In the final phase, the treated water is pumped through a distribution system and supplied to schools, residential areas, and the countryside through taps.

The diagram illustrates the number of stages that required to produce water treatment. Overall, the process of water treatment is a totally man-made , including 10 different phases, which starts with water intake from natural sources and finishes with faucet to households. The process begins when raw water is gathered naturally, which it passes pumps through intake screens. The next stage, water arrives flash mix to mixed polyaluminium chloride and oxidants it and subsequently send settling basin before flocculated into special tanks. During the subsequent phases, chlorine is introduced into water that passes through membrane filter to remove the remaining impurities. Next, water is disinfected with adding chlorine, lime or (sodium hydroxide), fluoride. Finally, clean water pass out through pump and delivered to households.

@Doniyor_Eshmurodov Hello,teacher you said you would send special worbs for process essay. Could you please send it?

✅Exam speaking questions in 2026 — Set 5 ✅ PART 1 Topic A: Books & Reading 📚 1. Do you enjoy reading books? Why/Why not? 2. What kind of books do you prefer (fiction/non-fiction)? 3. Do you think people read less nowadays? Why? 4. Did you read more when you were younger? Topic B: Travel & Holidays ✈️ 1. Do you prefer short trips or long holidays? Why? 2. What’s the best place you’ve visited in your country? 3. Do you plan your trips carefully or travel spontaneously? 4. How has travel changed in recent years? ✅ PART 2 (Cue Card) 🎤 Describe a memorable journey you had. 🧳 You should say: * where you went * who you went with * what happened during the journey * and explain why it was memorable ✅ PART 3 1. Why do people travel even when it is expensive? 2. How can tourism benefit local people, and how can it harm them? ⚖️ 3. Do you think international travel makes people more open-minded? Why/Why not? 🌍 4. Should governments limit tourism in certain places? Why? 5. What kinds of travel will be more popular in the future? 🚀 6. Do you think virtual tours can replace real travel? Why/Why not? 🥽 @IELTS_AGE